Description:

The Aircol™ PD oils range of compressor oils are based upon highly refined mineral oils and carefully chosen additives. They are intended for the lubrication of rotary and reciprocating compressors.

Application:

Aircol PD are ashless oils recommended for the lubrication of rotors, bearings and gears in rotary compressors, especially oil flooded screw types with delivery temperatures of up to 120°C. Aircol PD compressor oils exhibit low carbon forming tendencies and meet the requirements of the DIN 51506 VD-L classification for reciprocating compressors having air discharge temperatures up to 220°C. Aircol PD 32 and 46 are suitable for oil flooded rotary compressors, whilst Aircol PD 68 and 100 would be suitable for lubricating the crankcase and cylinders of reciprocating compressors. Aircol PD 150 is recommended for sliding vane compressors, or for reciprocating units operating at high ambient temperatures. Selection of the required viscosity grade should be based upon the compressor manufacturers' recommendation.

Advantages:

• Good viscosity characteristics over a wide range.
• Excellent water separation characteristics allows condensation to readily separate from the oil, minimising the risk of emulsions which could block the oil separator element.
• Prevents corrosion when operating under humid conditions.
• Excellent coalescing properties means little carry over of oil in the air stream.
• Low deposit forming tendencies extends oil change intervals and provides longer air filter life which contributes to a reduction in maintenance costs.
• Good thermal stability, low volatility and low carbon formation reduces the risk of fire and explosion.